TDN - Flame Flow™ 10 Gallon Copper Moonshine Liquor Distillation Unit

Quick Overview

10 Gallon Flame Flow™ Moonshine Still - Complete Unit What is the Flame Flow™ Moonshine Still? It has effectively, revolutionized the hobby distillation landscape.   With insane customer feedback to...
$ 989.85
Add to Wishlist

10 Gallon Flame Flow™ Moonshine Still - Complete Unit

The New Flame Flow Copper Moonshine Still

The Flame Flow is a new innovation in Moonshine Still Design

What is the Flame Flow™ Moonshine Still?

It has effectively, revolutionized the hobby distillation landscape.  

With insane customer feedback to back up our claims, it is an honor to present to the world the one, the only Flame-Flow™.  

This copper moonshine still is unlike any other moonshine still on the marketplace.  You are looking at the real deal here folks.  This copper moonshine still is equipped with 4 massive tubes that carry the flame up and through your moonshine still.  

This new method of delivering heat to your moonshine still is un-comparable to any other distillation unit on the marketplace.  The time trials speak volumes.  

This unit took over two years to develop and fine tune.  There were over 100 man hours of logged testing to ensure that not only our claims were accurate, but, the unit is safe for consumer purchase.  We have had an overwhelming amount of positive feedback from our customers about the Flame-Flow™

Contents

This is a complete kit which includes the...
 POT, THUMPER, WORM, and CAP with Temperature Gauge, built with 100% lead free materials.


Size

Pot and Cap – 10 Gallon

Thumper – 9x9 inches (Upgraded Thumper)

Worm – 10x12 inches (Upgraded Worm)

 

Weight 

31 pounds

 

Copper Thickness

20 oz. 22 Gauge Pure Organic Copper Sheets (Lead Free)

 

Uses

-Distilled, Purified Water (turn salt water into fresh water)
-Moonshine and other Distilled Spirits
-Essential oils and Perfumes
-Antiseptic
-Ethanol Gas (make your own Gas to run engines or heat your home)
-Marinade for meats and poultry
-Hash Oil from Marijuana (for medical purposes only)
Plus Much, Much More!!!

Estimated Output

 

            Formula for calculating mash output: Alcohol by Volume x Pot filled with product (Using 10 Gallon Complete Unit)

 

            Example 1 – Weak Mash (i.e. Wine) = 11% Alcohol by Volume

            Expected Output = 11% x 10 Gallons = 1.1 gallons of liquor

 

            Example 2 – Stronger Mash = 30% Alcohol by Volume

            Expected Output = 30% x 10 Gallons = 3 gallons of liquor 

 

Shipping

Free Shipping all over the Continental USA except for Alaska and Hawaii. For all other orders, give us a call at our phone number to see how we can deliver to your location. 

 

Delivery

Standard Orders (All other orders): 1 -2 Weeks to Ship

 

Videos 

Wow Video
 
Flame Flow™ Introduction
 
 
 

The Distillery Network is an artwork company that specializes in the manufacturing and production of Copper Artwork. Our skilled craftsmen create these unique, yet fully functional pieces of art located in the state of New Hampshire.

We specialize in the manufacturing and production of COPPER MOONSHINE STILLS, which are handcrafted to perfection!  Made using heavy guage copper and lead free solder, our units are built to last. All of our units are water tested and have ZERO leaks.

We are available to answer your questions so please call us or visit our web site at www.buyamoonshinestill.com

We also do custom orders.... 

Jonathan Zajac
1-603-997-6786 

 
 
 

 

 

All of our units come with a lifetime warranty from The Distillery Network Inc.
Moonshine Stills Instructions 

INSTRUCTIONS

1. Open your box.

2. Place pot on a table with temperature gage towards left hand side.

3. Take the smallest piece of the thumper with drain plug facing towards you and put to the right of the pot.

4. Take the worm which is attached to coil and put to the right of the thumper.

The Distillery Network Moonshine Still Instructions

5. Take the cap and insert it to the top of the pot, the bottom of the cap connects by spinning the spin ttings to the left side of the thumper.

A) The seam on the top of cap should interlock with seam of the back of the pot.

thumper keg for sale

 

6. When connecting the spin tting, if they should leak, use thread locking tape or wheat paste. The unit also comes with an adapter piece which is copper, and it connects to the top of right hand side of the thumper and goes to the worm spin ttings accordingly.

The Distillery Network Moonshine Still Instructions

7. Congratulations! You have successfully assembled your Moonshine Still but you still need to know how to use it.

8. You need a burner or any source of ame, you could also have a submerged heating element. Once you have a burner and propane you need some MASH. Mash is what you put in the still to get liquor.

9. MASH= Fermented materials that can range anywhere between 1% to 35% ABV (Alcohol By Volume). The higher the ABV, the more alcohol you will be able to pull out. The goal is to take out as much alcohol out of the mash with your Moonshine Still.

VISIT: WWW.MASH.RECIPES FOR SOME EASY RECIPES TO GET STARTED.

You are going to need a Hydrometer, which measures the alcohol content of the Mash, ‘cause it’s always nice to know what your alcohol is in the beginning and the end of the process. There are two dierent types of Hydrometers, one to use for low proof (of Mash) and one for high proof. Visit our accessory page to purchase more items from us.

10. Strain Mash for any hard materials and pour into pot. You are going to need to seal the cap of the pot with “old school” Wheat Paste or Black Electrical Tape, make sure to seal the unit well. The thumper is a double purication unit, it is not a necessity. We want you to run the Thumper dry (meaning, do not add anything in it) until you kow what you are doing. All our units are interchangeable, which means you can take the Thumper out and run it directly from the pot to the worm with the coil.

11. Your Worm, the one with the coil, needs constant ow of cool water (we recommend continuously lling it with ice) you can also get an upgraded Thumper and Worm Kit with any of our units which will give you 2 hoses to run water in and out.

12. Put a ame underneath the Pot until the unit starts to “work”; as soon as the Worm is dripping product, write the temperature down then add 2o degrees to it, “That is your Operating Range”. Always keep still within this range to make sure H2O does not go into your product.

13. Your Thumper will ll up with Liquid and eventually stop the distillation process. You will need to disregard the Thumper’s content or save and re-run in your next batch.

14. Do Not just go and start drinking what comes out of the unit. Please do the appropriate amount of research to make sure you disregard the appropriate amount of your distillate before drinking.

NOW YOU KNOW HOW TO PROPERLY USE YOUR NEW MOONSHINE STILL. VISIT OUR FACEBOOK PAGE AT WWW.FACEBOOK.COM/THEDISTILLERYNETWORK TO STAY CONECTED WITH US.

 

Purchase & Delivery

Our Moonshine Stills generally take 1 to 3 weeks in the shop before shipment. If you'd like adjustments or custom additions to your purchase, you can call us at (603) 548-3904



Warranty Information

All our products come with a lifetime warranty and a 30 day free return policy. 

Payment Information

 

We accept both credit cards and paypal. If you 're interested in paying any other way or if you would like to find a negotiable price, you can give us a call by phone (603) 548-3904